Welcome to Tribbeck.com

Martian - day 4

Now the shin was done, I needed to do the lower thigh.

Click to download

This isn't really a nice object to print sideways (which is the quickest), because it has a lot of overhangs. Because I was only printing one, I did do it sideways; vertical would've been twice as long, but due to a quirk in the printing process, two would not take much longer vertically than one.

Click to download Click to download Click to download
Click to download Click to download

« Previous day | Next day »

Updated: 2015-03-21 19:01:47 | Comments: 0 | Show comments | Add comment
© Copyright 1997-2013
Tribbeck.com / Jason Tribbeck
All trademarks are the property of their respective owners.