Eagle PCB Libraries
I've created some libraries for Eagle PCB for some of the things I've been working on.
Most of the components I've made boards from, but I can't say that they have been completely checked for errors. If you do find one, let me know (jason at tribbeck dot com).
All trademarks remain the ownership of the respective parties.
To download a library, click on the icon to the left of the name.
This contains ALPS EC11E and EC11J switched and non-switched variants
This contains ATMEL AT91SAM7S and AT91SAM7SE devices. There is an AT91SAM7S-W which is a copy of the AT91SAM7S, except the schematic is not square (it makes it easier to fit on a widescreen monitor).
This contains Cirrus Logic CS5343/4 audio ADCs.
This contains commercial board sizes, such as 3½" disk drive, Eurocard and the like.
This contains some additional Harwin connectors (M52 style).
This contains a replacement for the AMP MicroMatch library supplied in Eagle, with many more parts.
This contains some additional Molex connectors (main one being Mini PCI-E connector with latch).
This contains PCI express 36-way connectors - edge or PTH mounting socket.
This contains a few Phoenix 3.81mm connectors.
This contains AMP/Tyco connectors, mainly AMP-1241050 and AMP-1241150, but a couple of others as well.
This contains some crystal oscillators.
This contains some LCD/OLED display outlines (and in some cases, the connectors too).
This contains some FTDI devices (FT2232D and FT2232HQ).
This contains some SMT inductors.
This contains a couple of ISSI IS24S16xxx SDRAM devices.
This contains some Avago LEDs. Well, one family of 7-segment displays (HDSP-Uxxx).
This contains a couple of miscellaneous LED form factors.
This contains some additional Linear Technologies devices (LTC26x2 SPI DACs).
This contains some additional Microchip devices (93xx 6-pin EEPROMs)
This contains some NXP ARM LPC214x devices.
This contains some additional optoisolators (FOD260L - 3.3v).
This contains some PC-centric packages (ATX1.1 PSU connector, and some motherboard connectors found on an Intel Dual core Atom MiniITX board).
This contains a couple of SIL resistors with round pads instead of offset pads (to create a tighter packaging).
This contains additional supplies (VDDA and VDDCORE).
This contains a fairly random selection of switches, notably from ALPS and MEC.
This contains the Texas Instruments TUSB2046 USB hub.
This contains some additional voltage regulators.
This contains the Wolfson WM8727 I2S DAC.
This contains the XC3SE packages for VQ-100 and TQ-100 FPGAs.
This contains a lot of random packages, and was done before I started splitting them out. Things such as the Microchip ICSP 6-pin connector (assuming bent-over, marking edge of board), some PICs, some AMP/Harwin conectors, character-based LCD connectors.
This contains some additional PIC16Fs that aren't in the main Microchip library.
This contains some additional PIC18Fs that aren't in the main Microchip library.
|© Copyright 1997-2018|
Tribbeck.com / Jason Tribbeck
All trademarks are the property of their respective owners.